This graph compares the horsepower and torque of four different motorcycles. A Suzuki, Honda, Kawasaki, and Ducati. You can switch between displaying HP only, Torque only, or HP and Torque. The look of the graph can be changed by selecting Graph Options from the menu. Up to 6 dyno runs can be selected and displayed on the graph.
OnTrack Dyno Differencial Graph
By selecting one test run to be the Standard you can then show the difference between it and the other selected tests. In this graph the Suzuki has been selected as the Standard and the other bikes are compared to it to see the difference in horsepower through the rev range. In this graph we can see that at 6,500 RPM the Ducati produces 30 HP more than the Suzuki and the Suzuki is ahead of the Kawasaki above 9,500 RPM. You can display up to 6 dyno runs on a differential graph (the Standard and 5 others) and you can switch between Comparison and Differential graphs at any time.
The results of a dyno run can be shown in a Table that lists the engine RPM and the horsepower produced at each 50 RPM interval. The Table can also be used to manually create test runs by entering data from other dynos or to create an ideal run for comparison with other test runs.